Carbon Water Filter - Activated Carbon Block Filter Cartridge 10" Standard Carbon Filter for Chlorine, Taste, Color, and Odor Reduction Removes 95% of Chlorine from 10,000 Gallons of Water @ 0.75 GPM AMI Activated Carbon Filter Cartridges remove chlorine, organics, color, tannin, and objectionable tastes and odors from water. AMI 2.5 x 10" filter cartridge is the industry-standard "10-inch Standard" size and will fit most standard 10-inch filter housings. Made of Coconut Shell Carbon H-F2510AC Carbon filter is made with 100% carbon produced from coconut shells, a renewable and sustainable resource, offering superior chemical absorption compared to coal-based carbon filters. Benefits of AMI Extruded Carbon GAC Filters AMI Carbon Filters Significantly Reduce the Following Contaminants: Chlorine Chlorine By-Products - Trihalomethanes (THMs): A Group of organic chemicals suspected of being carcinogenic. Bad Tastes & Odors Turbidity (Cloudy Water) Herbicides, Pesticides, & Insecticides Volatile Organic Chemicals (VOCs): Organic Chemicals that turn into vapor. Universal Fit - Compatible with 10" Standard Filter Housings Best Tasting Water - Highest Absorption of Bad Tastes & Odors for Clean, Fresh Flavor Crystal Clear Ice & Water - Removes Color & Cloudiness 10 Micron Filtration - No carbon fines Eco-Friendly - Produced from renewable resources, using recycling programs and local sourcing Carbon Filter Specifications Model: H-F2510AC Brand: AMI Nominal Size: 10" Standard Actual Cartridge Dimensions: 2.5" OD x 1.25" ID x 9.8"L For Housing Dimensions: 4.5"OD x 11.4"L (Approx.) Capacity: 10,000 Gallon Chlorine Reduction (>95%) @ 0.75 GPM Flow Rate: 0.75 GPM (2.84 LPM) Micron Rating: >98% @ 10 μ (10 Micron) Initial ΔP: <2.0 psid @ 0.75 GPM Carbon Type: Coconut Shell Carbon Carbon Weight: 0.75 lb End Caps: Polypropylene End Caps with Compression Gaskets Operating Temperature: 40-125°F (4.5-51.5°C) Max. Operating Pressure: 125 psig (8.6 bar) Max. Differential Pressure: 100 psid (6.9 bar) Collapse Pressure: 200 psid (13.8 bar) Country of Manufacture: USA Key Features of AMI Carbon Block Filters AMI carbon block filters are designed, manufactured, and quality controlled in the united states. AMI carbon block water filters are produced in a WQA Certified Sustainable Facility. Removes 95% of Chlorine from 10,000 Gallons of Water AMI Activated Carbon Filter Cartridges remove chlorine, organics, color, tannin, and objectionable tastes and odors from water. Factory rated for 10,000 gallons of chlorine removal (95%) at 0.75 gpm flow rate. 100% Coconut Shell Carbon AMI Carbon Block Filters are coal-free, made with 100% Coconut-Shell based carbon. Coconut shells are a renewable and sustainable resource, for a lower carbon footprint. Coconut Shell Carbon also offers the highest absorption of chlorine, chemicals, and bad tastes and odors for the best tasting water. Backed by AMI Industry-Leading Expertise All AMI Home Water products are supported by AMI Certified Water Quality Technicians. and are backed by AMI’s Satisfaction Policy that is Trusted by Major Corporations and Governments World-Wide Will It Fit? AMI Carbon Block Filter - 10 Inch Standard Compatability The best way to check that the filter will work for your housing is to remove the old filter and measure it. Let’s start with length: “10 Inch Standard” is the industry-standard name for this size filter. The actual length of the cartridge is 9.75 inch. This filter can replace filters ranging from 2” to 2.85 OD. The outside diameter varies per filter type depending of the thickness or quantity of carbon around the core. This filter is 2.75” OD The core, or inner diameter, is the critical dimension. This filter is 1.125" ID. AMI Filters are designed to fit industry-standard “10 Inch Standard” filter housings. Most major filter housing brands, Home RO and whole-house filter manufacturers use these standard sizes. The actual outside dimensions of these housings is 4 ½” OD x 11 ½” but will var