AMI In-Line GAC Carbon Filter (Post Filter) for Water Treatment AMI Activated Carbon Filters remove chlorine, organics, color, tannin, and objectionable tastes and odors from water. Offered in ¼” female threaded ends, these self-contained filters are installed in-line, eliminating the need for an additional housing. Ideal for use as a polishing filter (post filter) in a home point of use RO system, or as a stand-alone filter for refrigerators, coolers, coffee makers, or ice maker installations. This item is commonly used for the post filter in many standard 5-stage home RO systems. Benefits of In-Line Carbon Water Filtration: AMI Carbon Filters Significantly Reduce the Following Contaminants: Chlorine Chlorine By-Products - Trihalomethanes (THMs): A Group of organic chemicals suspected of being carcinogenic Bad Tastes & Odors Turbidity (Cloudy Water) Herbicides, Pesticides, & Insecticides Volatile Organic Chemicals (VOCs): Organic Chemicals that turn into vapor In-line Installation Eliminates the Need for Additional Housings Coconut Shell Based Carbon is Ideal for Use as a Post/Polishing Filter Standard 1/4" NPT Threaded Connections Free of Surfactants, Binders, and Adhesives H-F1032-43A Specifications Manufacturer Model: H-F1032-43A Brand: AMI Filters In/Out Connections: ¼" FNPT Filter Length: 10" Filter Diameter: 2" Filtration Media: Coconut Shell Based Activated Carbon Service Flow Rate: 0.5 GPM (1.9 LPM) Max. Pressure: 100 psi Max. Temperature: 100°F (38°C) Min. Temperature: 35°F (2° C) Filter Life: 6 Months Filter Capacity: 2,500 gallons (9,500 liters) Caution: Do not use where the water is microbiologically unsafe or of unknown water quality without adequate disinfection before or after the unit.