💎 DURABLE STRUCTURE: 10” Transparent Standard Housing is proper for heavy sediment applications. The housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap is made of high-flow polypropylene for toughness. The cap has 3/4" inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. 10” Standard Granular Activated Carbon Filters Used for effectively removing remove chlorine, bad taste & odor from water 💎 POINT OF USE: This System for use in various applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, well water filtration, food service, and irrigation. Extends life of Washing Machines, Water Heaters & Other Household Appliances. Keeps water fresh by reducing sediment, scale, rust, dirt, sands, and silt 💎 EASY TO OPERATE: There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. Unique cap design allow quickly and easy to remove housing to replace cartridges. Transparent housing body allows visually to determine when cartridge should be changed 💎 GRANULAR CARBON CARTRIDGE is wrapped and sealed and meets NSF Standards and Regulations. Dimensions 9,875” x 2.5”. WELL-MATCHED: Everpure EV910811 CGT-10, AquaPure AP117, Cuno CFS117, American Plumber WCC 155155-51, Dupont WFPFC9001, GE GX1S01R, Culligan D-20A, Omni GAC1, WHKF-GAC, Hydronix HDG-P117, HydroCure PC 36599, 3M AP117, however for best preferment use only original RONAQUA CARTRIDGES 💎 WELL-MATCHED FOLLOWING HOUSINGS SYSTEMS: DuPont WFPF38001C, WFPF13003B, Culligan WTR Filter HF-360A and HF-150A, American Plumber WC34-PR, Geekpure RO5-FH10, Hydronix HF3-10CLBK34, EcoPure EPW2 The 10" Transparent Standard Housing for Whole House Water Filtration System with 3/4" Inlet / Outlet Brass Ports (RA-125-10) is proper to use for removing chlorine, odor and bad taste, and reducing dirt, rust, & suspended particles in incoming water to you house. The transparent housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap is made of high-flow polypropylene for toughness. The blue cap has 3/4" inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief valve on the outlet side of the cap releases pressure in the housing for changing filter cartridges. Those Housings for use in various applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, food service, and irrigation. Easy to connect multiply housings in one Custom Whole House Water Filtration System to fit your specific needs. Specifications Filter Type Coconut Shell Granullar Activated Carbon Unit Height IN/CM 12.5 IN/31.75 CM Unit Length IN/CM 5.125 IN/13.02 CM Unit Width IN/CM 5.125 IN/13.02 CM Inlet/Outlet Ports 3/4" NPT Bress Flow Rate 5 GPM Operating Temperature 40°F (4.4°C) - 125°F (51.7°C) Operating Pressure 20 PSI (1.4 bar) - 60 PSI (4.5 bar) Cartridge Lifetime Replace two or three times a year - depending on your water quality Cartridge Packaging This filter is wrapped and sealed and meets NSF (National Science Foundation) Product Specifications Included Components Filter Housing , Housing Wrench , Mounting Bracket , Screws , 3 Granular Activated Carbon Filters Part Number RA125-10-3GAC Style Granular Activated Carbon Filter UNSPSC Code 40161500