<strong>Specifications:</strong><ul> <li>Stick size:  11mm x 270mm /0.43" x 10.63"(Length*Diameter)</li> <li>Softening Point: 100°C</li> <li>Total Length：270mm/10.63"</li> </ul><strong>Description:</strong><ul> <li>Advanced, practical ,stability and strong viscosity design of this glue adhesive stick.</li> <li>This practical glue stick use in high temperature glue gun(not included).</li> <li>Great for car paintless dent repair and more.</li> </ul><strong>How to Use?</strong><br>1.Clean the dent with a clean wet cloth;<br>2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;<br>3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is);<br>4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);<br>5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);<br>6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;<br>7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;<br>8. Clean the repaired place with a clean wet cloth.<br><br><strong>Package Included:</strong><ul><li>12 x Hot Melt Glue Sticks(6 Black &amp; 6 Yellow)</li></ul>