<h2>1 Inch Handlebar Hand Grips for Harley</h2><p>These 1 inch handlebar hand grips are replacement grips for Harley motorcycles with 1 inch bars, covering the throttle and clutch side contact points on models such as Electra Glide, Road King, Softail, FL, and Dyna.</p><h4>Overview</h4><p>These 1 inch handlebar hand grips are designed for riders replacing worn, slick, or damaged grips on Harley motorcycles with standard 1 inch handlebars. The set covers both the throttle and clutch sides, restoring a solid grip surface for steering and throttle control. Riders on Electra Glide, Road King, Softail, FL, and Dyna models can use these hand grips to refresh the cockpit feel at a low cost.</p><h4>Built For Performance</h4><ul> <li>Fits 1 inch handlebars for a direct size match</li> <li>Textured surface for a secure hold with gloves or bare hands</li> <li>Sold as a matched pair for throttle and clutch sides</li> <li>Rubber style body that damps vibration at the bars</li> <li>Designed to slip over standard 1 inch bar ends without adapters</li> </ul><h4>Fits These Machines</h4><ul> <li>for Harley Electra Glide</li> <li>for Harley Road King</li> <li>for Harley Softail</li> <li>for Harley FL models</li> <li>for Harley Dyna</li> </ul><h4>On-The-Job Use</h4><ul> <li>Replacing grips worn smooth from years of riding</li> <li>Refreshing comfort on long touring rides</li> <li>Bar swaps and handlebar rebuilds</li> <li>Restoring grip after a drop or tip over</li> </ul><h4>Specs At A Glance</h4><table> <tr> <td><strong>Bar Size</strong></td> <td>1 inch</td> </tr> <tr> <td><strong>Type</strong></td> <td>Handlebar hand grips</td> </tr> <tr> <td><strong>Position</strong></td> <td>Left and right sides</td> </tr> <tr> <td><strong>Fitment</strong></td> <td>Harley models with 1 inch bars</td> </tr> </table><h4>Good To Know</h4><p><strong>Q:</strong> Are these grips sold as a pair? <strong>A:</strong> Yes, the set covers both the throttle and clutch sides for a complete bar refresh. Confirm your bar diameter is 1 inch before ordering.</p><p><strong>Q:</strong> Will these work with throttle by wire? <strong>A:</strong> Throttle by wire setups use different right side hardware, so check your model year and control type before ordering. Match the grip openings to your stock components for the best result.</p><p><em>Slight variation in finish or dimensions may occur between production runs, and fit can depend on serial number, so confirm compatibility before ordering.</em></p>