<p><strong>Feature:</strong></p><ul> <li>The camshaft position sensor detects engine speed, piston end position and firing cylinder end signals.</li> <li>Direct replace and install, convenient to use.</li> <li>It is a good replacement for the old or broken one.</li> <li>This is a non-OEM product, accessory only!</li> </ul><p><strong>Specification:</strong></p><ul> <li>Material: Plastic+Metal </li> <li>OE Number:55567243/55565708/55565709/25195555/25195556 </li> </ul><p><strong>Fitment:</strong></p><ul> <li>for Chevrolet Cruze L4 1.8L 2011-2016</li> <li>for Chevrolet Cruze Limited L4 1.8L 2016</li> <li>for Chevrolet Sonic L4 1.8L 2012-2018 </li> </ul><p><strong>Professional installation:</strong></p><ul> <li>1. Disconnect Battery: Safely disconnect the negative battery terminal to prevent electrical shorts.</li> <li>2. Locate &amp; Access Sensor: Find the sensor on the engine, typically near the cylinder head or timing cover. Remove any components blocking access.</li> <li>3. Remove Old Sensor: Unplug its electrical connector. Unscrew or unclip the old sensor from its mounting.</li> <li>4. Install New Sensor: Place the new sensor into position. Hand-tighten screws or secure the clip. Reconnect the electrical connector firmly.</li> <li>5. Reconnect &amp; Test: Reconnect the battery. Start the engine to verify proper operation and check for warning lights.</li> </ul><p><strong>Package included:</strong></p><ul> <li>1 Set Camshaft Position Sensor Kit </li> <li>Crankshaft Position Sensor X1 </li> </ul><p><strong>Note:</strong></p><ul><li>Please make sure your model's ENGINE and TRIM are as described before purchasing!</li></ul>