<ul> <li> <strong>Design Code:</strong> TCNV</li> <li> <strong>Inside Diameter:</strong> 110 mm</li> <li> <strong>Outside Diameter:</strong> 130 mm</li> <li> <strong>Overall Width:</strong> 12 mm</li> <li> <strong>Contact Type:</strong> Contact Seal</li> <li> <strong>Lip Material:</strong> Fluoro Rubber</li> </ul><h3>Specifications</h3><table><tbody> <tr> <td>Part Number</td> <td>11013012TCNV</td> </tr> <tr> <td>Brand</td> <td>DDS</td> </tr> <tr> <td>Item</td> <td>Rotary Shaft Seal</td> </tr> <tr> <td>Design Code</td> <td>TCNV</td> </tr> <tr> <td>Inside Diameter</td> <td>110 mm</td> </tr> <tr> <td>Outside Diameter</td> <td>130 mm</td> </tr> <tr> <td>Overall Width</td> <td>12 mm</td> </tr> <tr> <td>Contact Type</td> <td>Contact Seal</td> </tr> <tr> <td>Lip Material</td> <td>Fluoro Rubber</td> </tr> <tr> <td>Maximum Pressure</td> <td>50 psi</td> </tr> <tr> <td>Number of Lips</td> <td>2</td> </tr> <tr> <td>System of Measurement</td> <td>Metric</td> </tr> <tr> <td>Case Coating</td> <td>Uncoated</td> </tr> <tr> <td>Seal Type</td> <td>Dual Lip Seal</td> </tr> </tbody></table><h3>Description</h3><p>The DDS 11013012TCNV is a metric rotary shaft seal with a TCNV design code and a dual-lip contact seal configuration. It has an inside diameter of 110 mm, an outside diameter of 130 mm, and an overall width of 12 mm. The lip material is fluoro rubber, the case coating is uncoated, and the seal has a maximum pressure rating of 50 psi.</p><p>Confirm the part number against your existing unit or equipment before ordering to ensure correct fit.</p>