90° FLEXIBLE DRILL ATTACHMENT Reach The Spaces Your Drill Can't. Turn tight angles and awkward corners into workable access with a flexible right-angle attachment for compatible drills and drivers. 90° right-angle headFlexible shaftDrill & drive When A Straight Drill Won't Fit Cabinet interiors, narrow gaps, board edges and crowded work areas can make a regular drill difficult to position. This attachment changes the access angle while the drill stays where you can control it. Less awkward positioning Keep the main drill body outside the tight area and bring the working end closer to the fastener or hole. More reach around obstacles The flexible shaft bends around nearby structures when a straight line of access is unavailable. One Attachment. More Access. 90° right-angle transfer: change the working direction for confined spaces. Flexible soft shaft: route around obstacles and awkward angles. Drill and drive support: suitable for compatible drilling and screw-driving tasks. Auxiliary handle: hold the angle head with added control while working. Made For Real Repair & DIY Jobs Use it where access is the problem: furniture assembly, cabinet installation, woodworking, maintenance and other confined-space tasks. Furniture & cabinets Reach fasteners inside frames, corners and enclosed compartments. Woodworking Drill or drive near board edges and structural obstacles. Home maintenance Handle awkward positions without forcing the full drill into the gap. Workshop tasks Keep a useful angle adapter ready for hard-to-reach jobs. Connect It In A Few Simple Steps 1 Switch off your drill Remove the battery or disconnect power before fitting the attachment. 2 Attach the shaft Secure the connector in a compatible drill or driver chuck/holder. 3 Fit your bit Install a suitable drill bit or driver bit in the right-angle head. 4 Hold and work steadily Use the auxiliary handle to guide the head while keeping the shaft free from sharp bends. Use the attachment only with compatible tools and accessories. Follow the manufacturer’s operating guidance and wear appropriate eye protection. What Makes It Useful? Compact working head The 90° head can approach positions that are difficult for a full-size drill body. Flexible connection The soft shaft gives you routing freedom when the direct path is blocked. Familiar power source Use your compatible drill or driver instead of carrying a separate powered tool. Portable workshop helper Keep it with your drill accessories for repairs, assembly and installation work. Product Details Product type 90° flexible right-angle drill attachment Use Confined-space drilling and screw driving Connection For compatible drills, drivers and bits Head angle 90° right-angle working head Structure Metal angle head, flexible shaft and auxiliary handle Included Attachment body with flexible shaft and handle, according to selected package Check the connector and accessory specifications against your existing drill before ordering. Drill, battery, bits and screws shown in demonstrations may not be included. Helpful Answers Is this a complete drill? No. It is an attachment designed to be used with a compatible drill or electric screwdriver. What can I use it for? It is intended for drilling and screw-driving work in tight or awkward spaces, such as furniture, cabinets and woodworking projects. Can the shaft bend? Yes. The flexible shaft is designed to route around obstacles. Avoid sharp kinks and follow the supplied instructions. Does it work with every drill? Compatibility depends on the drill connection, bit interface and operating requirements. Confirm the specifications before use. Is it suitable for impact drilling? Do not use impact mode unless the product instructions specifically state that it is supported. GET INTO THE TIGHT SPOTS Turn Awkward Angles Into Easy Access. Keep your compatible drill outside the gap and bring the working end where the job actually is. Explore The Drill Attachment ↑ Reach The Tightest Spaces Ma