Give your De'Longhi Dedica portafilter a dedicated place to hang between shots — right on the side of your espresso machine. The Grind to Brew Co. Side Portafilter Holder was designed specifically around the shape of the De'Longhi Dedica, creating a convenient storage location for your portafilter without taking up additional counter space. The holder keeps the portafilter hanging straight vertically alongside the machine, keeping it within easy reach while helping organize your espresso station. Designed Around the Shape of the Dedica This isn't a generic adhesive hook. The upper section of the holder incorporates the curvature and angles of the De'Longhi Dedica, allowing it to fit against the upper side of the machine and form a secure hanging point. The shaped upper section helps locate the holder in the correct position, while the included double-sided adhesive tape secures it to the side wall of the machine for a more permanent installation. The result is a holder that looks and functions as though it was designed specifically for the machine — because it was. Keep Your Portafilter Off the Counter When the portafilter isn't installed in the group head, simply hang it vertically from the side holder. This gives your portafilter a dedicated storage location while keeping valuable counter space clear. It's especially useful for compact espresso setups where the Dedica's small footprint is part of the reason you chose the machine in the first place. Optional Puck Screen Storage Choose from three versions depending on your espresso workflow: No Puck Screen Slots A clean, simple portafilter holder without additional storage slots. 1 Puck Screen Slot Includes one integrated slot for storing a compatible puck screen alongside your portafilter. 2 Puck Screen Slots Includes two integrated slots, giving you room to keep two puck screens organized and within reach. The slots provide a dedicated place for the thin metal puck screens used on top of the coffee puck during espresso preparation, so they don't have to sit loose on your counter or drip tray. Designed for the De'Longhi Dedica Portafilter The hanging geometry is designed around the De'Longhi Dedica portafilter, allowing it to hang straight vertically against the side of the machine. Please note that this is a machine-specific accessory and is not intended as a universal portafilter holder. Features Designed specifically for the De'Longhi Dedica Upper profile follows the curvature and angles of the machine Creates a dedicated side-mounted portafilter storage location Keeps the portafilter hanging vertically Helps free up counter space Included double-sided adhesive tape secures the holder to the machine Available with 0, 1, or 2 puck-screen storage slots Keeps puck screens organized alongside your espresso setup No drilling or screws required Original Grind to Brew Co. design 3D printed Installation Clean and completely dry the installation area before applying the adhesive. Position the holder against the upper side of the Dedica so the shaped section follows the machine's profile. Once you have confirmed the correct position, remove the protective backing from the included double-sided tape and press the holder firmly into place. Allow the adhesive to establish a secure bond before hanging the portafilter. Important: Adhesive performance depends on surface cleanliness, installation, environmental conditions, and use. Always make sure the holder is securely attached before hanging your portafilter. Material & Care This product is 3D printed and should be cared for accordingly. Clean with a soft, damp cloth or hand wash with cool or lukewarm water and mild soap when necessary. Do not place in the dishwasher, microwave, or expose to boiling water. Keep away from open flames, hot surfaces, and other sources of excessive heat. Allow the product to dry completely before returning it to your coffee setup. Due to the nature of 3D printing, minor layer lines and small surface variati