La Pavoni Heating Element 4 prong NOT for US/Canadian Voltage FOR EUROPEAN and other countries with similar Voltage 230V 1000W/200W Fits: All Europiccola and Professionale models with the white I and II position switch and a bolt-on element. DOES NOT fit 1978 & earlier machines with the screw-in element, however, you can use this flange to retrofit a stainless-steel bolt-on element onto a unit which originally used the screw-in element. Uses the P-7ss gasket, or, if you’re boiler is warped or pitted, the P-7ss-TH gasket may help prevent a leak. As with all heating elements, we strongly recommend that you replace the gasket when replacing the element. Please choose from the options below. In addition, brittle wires and/or yellowed connector covers indicate overheating and can contribute to premature failure of components, such as switches. Please consider replacing the wires, connectors, and connector covers if needed on your unit. A selection of parts can be found in our Miscellaneous Electrical Parts section. If you are replacing the old brass and copper element on your La Pavoni, there are additional parts you will need to complete this upgrade: P-7ss P-18s (three pieces) P-14a P-16-1 NTE303