9-Piece Gasket Kit to Rebuild Grouphead and Steam Valve on PRE-Millennium Europiccola, Professionale, and Stradivari (and related lever models) Now available with Silicone Piston Gaskets. See the drop down menu below to substitute the standard black piston gaskets with the red Silicone P-53 piston gaskets. The silicone gaskets are softer and therefore easier to install, and they should last longer under normal usage. This Kit is for rebuilding the Grouphead and the Steam Valve. Additional parts are needed for a complete rebuild, such as Sight Glass Gaskets, Heating Element Gasket and more depending on your machine’s age and version. For a demonstration on how to rebuild you Pre-Millennium La Pavoni lever machine, please see this video. Europiccola and Professionale PRE-Millennium Models from +/- 1974 (contact us for more information if you have a machine from the early 70s). Includes the following: 1 of P-55 Grouphead Gasket 2 of P-53 Piston Gaskets (See silicone substitution option below) 1 of P-50 Piston Washer 1 of P-51 Piston C-Clip 1 of P-49 Shaft Gasket 1 of P-23 Steam Valve Gasket 1 of P-2 Knob O-Ring 1 of P-45 Boiler to Group Gasket Now includes a 6-gram packet of Food Grade Grease (108-H) —- Detailed Instruction Sheet included —- Note: If you have a late-model PRE-Millennium with a bayonet wand, then there are 2 P-110CA o-rings where the wand attaches to the steam valve that you may want to replace as well. Note: To remove the C-Clip retaining ring, you will need a pair of “snap ring pliers,” such as one of these on Amazon: https://amzn.to/3GXOwGL Note that these are relatively inexpensive and intended for occasional use. Millennium are Lever machines made since the year 2000. Not sure if you have a Millennium or Pre-Millennium model? Click here for measurements.